dmesg - elina ramspped
random: get_random_bytes called from start_kernel+0x42/0x507 with crng_init=0
Linux version 4.13.0-1028-oem (buildd@lcy01-amd64-002) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.9)) #31-Ubuntu SMP Thu May 17 15:03:43 UTC 2018 (Ubuntu 4.13.0-1028.31-oem 4.13.16)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable
BIOS-e820: [mem 0x000000000009e000-0x000000000009efff] reserved
BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] usable
BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000069155fff] usable
BIOS-e820: [mem 0x0000000069156000-0x0000000069156fff] ACPI NVS
BIOS-e820: [mem 0x0000000069157000-0x0000000069157fff] reserved
BIOS-e820: [mem 0x0000000069158000-0x0000000078be2fff] usable
BIOS-e820: [mem 0x0000000078be3000-0x000000007a35afff] reserved
BIOS-e820: [mem 0x000000007a35b000-0x000000007a3d7fff] ACPI data
BIOS-e820: [mem 0x000000007a3d8000-0x000000007ad4cfff] ACPI NVS
BIOS-e820: [mem 0x000000007ad4d000-0x000000007b41afff] reserved
BIOS-e820: [mem 0x000000007b41b000-0x000000007b4fdfff] type 20
BIOS-e820: [mem 0x000000007b4fe000-0x000000007b4fefff] usable
BIOS-e820: [mem 0x000000007b4ff000-0x000000007f7fffff] reserved
BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000027e7fffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.70 by American Megatrends
efi: ACPI 2.0=0x7a374000 ACPI=0x7a374000 SMBIOS=0xf0000 SMBIOS 3.0=0xf0020 ESRT=0x7b130218 MEMATTR=0x7495e018
random: fast init done
SMBIOS 3.1.1 present.
DMI: Dell Inc. G3 3579/03TF0Y, BIOS 1.4.0 09/05/2018
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x27e800 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0080000000 mask 7F80000000 uncachable
1 base 007E000000 mask 7FFE000000 uncachable
2 base 007D000000 mask 7FFF000000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: last_pfn = 0x7b4ff max_arch_pfn = 0x400000000
esrt: Reserving ESRT space from 0x000000007b130218 to 0x000000007b130250.
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff9d2700098000] 98000 size 24576
Using GB pages for direct mapping
BRK [0x18f52c000, 0x18f52cfff] PGTABLE
BRK [0x18f52d000, 0x18f52dfff] PGTABLE
BRK [0x18f52e000, 0x18f52efff] PGTABLE
BRK [0x18f52f000, 0x18f52ffff] PGTABLE
BRK [0x18f530000, 0x18f530fff] PGTABLE
BRK [0x18f531000, 0x18f531fff] PGTABLE
BRK [0x18f532000, 0x18f532fff] PGTABLE
BRK [0x18f533000, 0x18f533fff] PGTABLE
BRK [0x18f534000, 0x18f534fff] PGTABLE
Secure boot could not be determined
RAMDISK: [mem 0x30b28000-0x3458bfff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x000000007A374000 000024 (v02 DELL )
ACPI: XSDT 0x000000007A3740B8 0000F4 (v01 DELL CBX3 01072009 AMI 00010013)
ACPI: FACP 0x000000007A3B60E0 000114 (v06 DELL CBX3 01072009 AMI 00010013)
ACPI: DSDT 0x000000007A374240 041E9B (v02 DELL CBX3 01072009 INTL 20160527)
ACPI: FACS 0x000000007AD4BC00 000040
ACPI: APIC 0x000000007A3B61F8 0000F4 (v04 DELL CBX3 01072009 AMI 00010013)
ACPI: FPDT 0x000000007A3B62F0 000044 (v01 DELL CBX3 01072009 AMI 00010013)
ACPI: FIDT 0x000000007A3B6338 00009C (v01 DELL CBX3 01072009 AMI 00010013)
ACPI: MCFG 0x000000007A3B63D8 00003C (v01 DELL CBX3 01072009 MSFT 00000097)
ACPI: SSDT 0x000000007A3B6418 000761 (v01 SataRe SataTabl 00001000 INTL 20160527)
ACPI: SSDT 0x000000007A3B6B80 0017D5 (v02 CpuRef CpuSsdt 00003000 INTL 20160527)
ACPI: BOOT 0x000000007A3B8358 000028 (v01 DELL CBX3 01072009 AMI 00010013)
ACPI: SSDT 0x000000007A3B8380 001336 (v02 SaSsdt SaSsdt 00003000 INTL 20160527)
ACPI: SSDT 0x000000007A3B96B8 0025EE (v02 PegSsd PegSsdt 00001000 INTL 20160527)
ACPI: HPET 0x000000007A3BBCA8 000038 (v01 INTEL CBX3 00000002 01000013)
ACPI: SSDT 0x000000007A3BBCE0 002A07 (v02 INTEL xh_cfhd4 00000000 INTL 20160527)
ACPI: UEFI 0x000000007A3BE6E8 000048 (v01 DELL\x CBX3 00000002 01000013)
ACPI: LPIT 0x000000007A3BE730 00005C (v01 INTEL CBX3 00000002 01000013)
ACPI: SSDT 0x000000007A3BE790 0027DE (v02 INTEL PtidDevc 00001000 INTL 20160527)
ACPI: SSDT 0x000000007A3C0F70 000FFE (v02 INTEL TbtTypeC 00000000 INTL 20160527)
ACPI: DBGP 0x000000007A3C1F70 000034 (v01 DELL\x CBX3 00000002 01000013)
ACPI: DBG2 0x000000007A3C1FA8 000054 (v00 DELL\x CBX3 00000002 01000013)
ACPI: SSDT 0x000000007A3C2000 0007E8 (v02 DELL\x UsbCTabl 00001000 INTL 20160527)
ACPI: SSDT 0x000000007A3C27E8 006193 (v02 DptfTa DptfTabl 00001000 INTL 20160527)
ACPI: SSDT 0x000000007A3C8980 000144 (v02 Intel ADebTabl 00001000 INTL 20160527)
ACPI: SSDT 0x000000007A3C8AC8 0000AE (v02 SgRef SgPeg 00001000 INTL 20160527)
ACPI: DMAR 0x000000007A3C8B78 0000A8 (v01 INTEL EDK2 00000002 01000013)
ACPI: BGRT 0x000000007A3C8C20 000038 (v00 01072009 AMI 00010013)
ACPI: TPM2 0x000000007A3C8C58 000034 (v04 DELL\x CBX3 00000001 AMI 00000000)
ACPI: SSDT 0x000000007A3C8C90 001F98 (v01 OptRef OptTabl 00001000 INTL 20160527)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000027e7fffff]
NODE_DATA(0) allocated [mem 0x27e7d5000-0x27e7fffff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000027e7fffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009dfff]
node 0: [mem 0x000000000009f000-0x000000000009ffff]
node 0: [mem 0x0000000000100000-0x0000000069155fff]
node 0: [mem 0x0000000069158000-0x0000000078be2fff]
node 0: [mem 0x000000007b4fe000-0x000000007b4fefff]
node 0: [mem 0x0000000100000000-0x000000027e7fffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000027e7fffff]
On node 0 totalpages: 2061184
DMA zone: 64 pages used for memmap
DMA zone: 23 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 7664 pages used for memmap
DMA32 zone: 490466 pages, LIFO batch:31
Normal zone: 24480 pages used for memmap
Normal zone: 1566720 pages, LIFO batch:31
Reserving Intel graphics memory at 0x000000007d800000-0x000000007f7fffff
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 12 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0x69156000-0x69156fff]
PM: Registered nosave memory: [mem 0x69157000-0x69157fff]
PM: Registered nosave memory: [mem 0x78be3000-0x7a35afff]
PM: Registered nosave memory: [mem 0x7a35b000-0x7a3d7fff]
PM: Registered nosave memory: [mem 0x7a3d8000-0x7ad4cfff]
PM: Registered nosave memory: [mem 0x7ad4d000-0x7b41afff]
PM: Registered nosave memory: [mem 0x7b41b000-0x7b4fdfff]
PM: Registered nosave memory: [mem 0x7b4ff000-0x7f7fffff]
PM: Registered nosave memory: [mem 0x7f800000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfdffffff]
PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0x7f800000-0xefffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:12 nr_cpu_ids:12 nr_node_ids:1
percpu: Embedded 45 pages/cpu @ffff9d2975a00000 s146584 r8192 d29544 u262144
pcpu-alloc: s146584 r8192 d29544 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 -- -- -- --
Built 1 zonelists in Node order, mobility grouping on. Total pages: 2028953
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 7915448K/8244736K available (12300K kernel code, 2481K rwdata, 4012K rodata, 2368K init, 2372K bss, 329288K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=1
Kernel/User page tables isolation: enabled
ftrace: allocating 37875 entries in 148 pages
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=12.
Tasks RCU enabled.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=12
NR_IRQS: 524544, nr_irqs: 2152, preallocated irqs: 16
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
hpet clockevent registered
tsc: Detected 2200.000 MHz processor
tsc: Detected 2208.000 MHz TSC
Calibrating delay loop (skipped), value calculated using timer frequency.. 4416.00 BogoMIPS (lpj=8832000)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20170531
ACPI: 13 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
FEATURE SPEC_CTRL Present
mce: CPU supports 12 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Spectre V2 mitigation: Mitigation: Full generic retpoline
Spectre V2 mitigation: Speculation control IBPB supported IBRS supported
Spectre V2 mitigation: Retpoline compiled kernel. Defaulting IBRS to disabled
Spectre V2 mitigation: Filling RSB on context switch
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
Freeing SMP alternatives memory: 36K
smpboot: Max logical packages: 2
DMAR: Host address width 39
DMAR: DRHD base: 0x000000fed90000 flags: 0x0
DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
DMAR: DRHD base: 0x000000fed91000 flags: 0x1
DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
DMAR: RMRR base: 0x0000007aedc000 end: 0x0000007b125fff
DMAR: RMRR base: 0x0000007d000000 end: 0x0000007f7fffff
DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
DMAR-IR: HPET id 0 under DRHD base 0xfed91000
DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
DMAR-IR: Enabled IRQ remapping in x2apic mode
x2apic enabled
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i7-8750H CPU @ 2.20GHz (family: 0x6, model: 0x9e, stepping: 0xa)
Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
... version: 4
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
Hierarchical SRCU implementation.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2 #3 #4 #5 #6 #7 #8 #9 #10 #11
smp: Brought up 1 node, 12 CPUs
smpboot: Total of 12 processors activated (52992.00 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0x69156000-0x69156fff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0x7a3d8000-0x7ad4cfff] (9916416 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 4096 (order: 6, 262144 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 6:49:48, date: 06/14/19
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
Simple Boot Flag at 0x47 set to 0x80
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820
PCI: Using configuration type 1 for base access
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Executed 45 blocks of module-level executable AML code
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9D297391E800 0005BE (v02 PmRef Cpu0Ist 00003000 INTL 20160527)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: \_SB_.PR00: _OSC native thermal LVT Acked
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9D2973BD9C00 000400 (v02 PmRef Cpu0Cst 00003001 INTL 20160527)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9D2973916000 00011B (v02 PmRef Cpu0Hwp 00003000 INTL 20160527)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9D2973919000 000724 (v02 PmRef HwpLvt 00003000 INTL 20160527)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9D297553B000 000EF1 (v02 PmRef ApIst 00003000 INTL 20160527)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9D2973BDA000 000317 (v02 PmRef ApHwp 00003000 INTL 20160527)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9D2973BDB400 00030A (v02 PmRef ApCst 00003000 INTL 20160527)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: EC: EC started
ACPI: EC: interrupt blocked
ACPI: \_SB_.PCI0.LPCB.ECDV: Used as first EC
ACPI: \_SB_.PCI0.LPCB.ECDV: GPE=0x6e, EC_CMD/EC_SC=0x934, EC_DATA=0x930
ACPI: \_SB_.PCI0.LPCB.ECDV: Used as boot DSDT EC to handle transactions
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 8 GPEs in block 00 to 7F
ACPI: Power Resource [PG00] (on)
ACPI: Power Resource [USBC] (on)
ACPI: Power Resource [V0PR] (on)
ACPI: Power Resource [V1PR] (on)
ACPI: Power Resource [V2PR] (on)
ACPI Error: Method parse/execution failed \_SB.PCI0.SPI1.FPNT._CRS, AE_AML_INVALID_RESOURCE_TYPE (20170531/psparse-550)
ACPI Error: Method execution failed \_SB.PCI0.SPI1.FPNT._CRS, AE_AML_INVALID_RESOURCE_TYPE (20170531/uteval-103)
ACPI Error: Method parse/execution failed \_SB.PCI0.SPI2.FPNT._CRS, AE_AML_INVALID_RESOURCE_TYPE (20170531/psparse-550)
ACPI Error: Method execution failed \_SB.PCI0.SPI2.FPNT._CRS, AE_AML_INVALID_RESOURCE_TYPE (20170531/uteval-103)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [PIN] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0x7f800000-0xefffffff window]
pci_bus 0000:00: root bus resource [mem 0xfc800000-0xfe7fffff window]
pci_bus 0000:00: root bus resource [bus 00-7e]
pci 0000:00:00.0: [8086:3ec4] type 00 class 0x060000
pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [8086:3e9b] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xa2000000-0xa2ffffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0x5000-0x503f]
pci 0000:00:02.0: BAR 2: assigned to efifb
pci 0000:00:04.0: [8086:1903] type 00 class 0x118000
pci 0000:00:04.0: reg 0x10: [mem 0xa4410000-0xa4417fff 64bit]
pci 0000:00:08.0: [8086:1911] type 00 class 0x088000
pci 0000:00:08.0: reg 0x10: [mem 0xa442c000-0xa442cfff 64bit]
pci 0000:00:12.0: [8086:a379] type 00 class 0x118000
pci 0000:00:12.0: reg 0x10: [mem 0xa442b000-0xa442bfff 64bit]
pci 0000:00:14.0: [8086:a36d] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xa4400000-0xa440ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.2: [8086:a36f] type 00 class 0x050000
pci 0000:00:14.2: reg 0x10: [mem 0xa4422000-0xa4423fff 64bit]
pci 0000:00:14.2: reg 0x18: [mem 0xa442a000-0xa442afff 64bit]
pci 0000:00:14.3: [8086:a370] type 00 class 0x028000
pci 0000:00:14.3: reg 0x10: [mem 0xa441c000-0xa441ffff 64bit]
pci 0000:00:14.3: PME# supported from D0 D3hot D3cold
pci 0000:00:15.0: [8086:a368] type 00 class 0x0c8000
pci 0000:00:15.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
pci 0000:00:15.1: [8086:a369] type 00 class 0x0c8000
pci 0000:00:15.1: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
pci 0000:00:16.0: [8086:a360] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xa4427000-0xa4427fff 64bit]
pci 0000:00:16.0: PME# supported from D3hot
pci 0000:00:17.0: [8086:a353] type 00 class 0x010601
pci 0000:00:17.0: reg 0x10: [mem 0xa4420000-0xa4421fff]
pci 0000:00:17.0: reg 0x14: [mem 0xa4426000-0xa44260ff]
pci 0000:00:17.0: reg 0x18: [io 0x5090-0x5097]
pci 0000:00:17.0: reg 0x1c: [io 0x5080-0x5083]
pci 0000:00:17.0: reg 0x20: [io 0x5060-0x507f]
pci 0000:00:17.0: reg 0x24: [mem 0xa4425000-0xa44257ff]
pci 0000:00:17.0: PME# supported from D3hot
pci 0000:00:1d.0: [8086:a330] type 01 class 0x060400
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: PTM enabled (root), 4dns granularity
pci 0000:00:1d.5: [8086:a335] type 01 class 0x060400
pci 0000:00:1d.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.5: PTM enabled (root), 4dns granularity
pci 0000:00:1f.0: [8086:a30d] type 00 class 0x060100
pci 0000:00:1f.3: [8086:a348] type 00 class 0x040300
pci 0000:00:1f.3: reg 0x10: [mem 0xa4418000-0xa441bfff 64bit]
pci 0000:00:1f.3: reg 0x20: [mem 0xa4100000-0xa41fffff 64bit]
pci 0000:00:1f.3: PME# supported from D3hot D3cold
pci 0000:00:1f.4: [8086:a323] type 00 class 0x0c0500
pci 0000:00:1f.4: reg 0x10: [mem 0xa4424000-0xa44240ff 64bit]
pci 0000:00:1f.4: reg 0x20: [io 0xefa0-0xefbf]
pci 0000:00:1f.5: [8086:a324] type 00 class 0x0c8000
pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff]
pci 0000:01:00.0: [10de:1c8c] type 00 class 0x030200
pci 0000:01:00.0: reg 0x10: [mem 0xa3000000-0xa3ffffff]
pci 0000:01:00.0: reg 0x14: [mem 0x90000000-0x9fffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xa0000000-0xa1ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0x4000-0x407f]
pci 0000:01:00.0: reg 0x30: [mem 0xa4000000-0xa407ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:01.0: bridge window [mem 0xa3000000-0xa40fffff]
pci 0000:00:01.0: bridge window [mem 0x90000000-0xa1ffffff 64bit pref]
pci 0000:02:00.0: [1179:0113] type 00 class 0x010802
pci 0000:02:00.0: reg 0x10: [mem 0xa4300000-0xa4303fff 64bit]
pci 0000:02:00.0: PME# supported from D0 D3hot
pci 0000:00:1d.0: PCI bridge to [bus 02]
pci 0000:00:1d.0: bridge window [mem 0xa4300000-0xa43fffff]
pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [io 0x3000-0x30ff]
pci 0000:03:00.0: reg 0x18: [mem 0xa4204000-0xa4204fff 64bit]
pci 0000:03:00.0: reg 0x20: [mem 0xa4200000-0xa4203fff 64bit]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1d.5: PCI bridge to [bus 03]
pci 0000:00:1d.5: bridge window [io 0x3000-0x3fff]
pci 0000:00:1d.5: bridge window [mem 0xa4200000-0xa42fffff]
ACPI Exception: AE_NOT_FOUND, Evaluating _PRS (20170531/pci_link-176)
ACPI Exception: AE_NOT_FOUND, Evaluating _PRS (20170531/pci_link-176)
ACPI Exception: AE_NOT_FOUND, Evaluating _PRS (20170531/pci_link-176)
ACPI Exception: AE_NOT_FOUND, Evaluating _PRS (20170531/pci_link-176)
ACPI Exception: AE_NOT_FOUND, Evaluating _PRS (20170531/pci_link-176)
ACPI Exception: AE_NOT_FOUND, Evaluating _PRS (20170531/pci_link-176)
ACPI Exception: AE_NOT_FOUND, Evaluating _PRS (20170531/pci_link-176)
ACPI Exception: AE_NOT_FOUND, Evaluating _PRS (20170531/pci_link-176)
ACPI: EC: interrupt unblocked
ACPI: EC: event unblocked
ACPI: \_SB_.PCI0.LPCB.ECDV: GPE=0x6e, EC_CMD/EC_SC=0x934, EC_DATA=0x930
ACPI: \_SB_.PCI0.LPCB.ECDV: Used as boot DSDT EC to handle transactions and events
SCSI subsystem initialized
libata version 3.00 loaded.
pci 0000:00:02.0: vgaarb: setting as boot VGA device
pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:00:02.0: vgaarb: bridge control possible
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
EDAC MC: Ver: 3.0.0
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
e820: reserve RAM buffer [mem 0x69156000-0x6bffffff]
e820: reserve RAM buffer [mem 0x78be3000-0x7bffffff]
e820: reserve RAM buffer [mem 0x7b4ff000-0x7bffffff]
e820: reserve RAM buffer [mem 0x27e800000-0x27fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 24.000000 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [io 0x0680-0x069f] has been reserved
system 00:00: [io 0x164e-0x164f] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:02: [io 0x1854-0x1857] has been reserved
system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:04: Plug and Play ACPI device, IDs DLL086f PNP0f13 (active)
system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:05: [mem 0xf0000000-0xf7ffffff] has been reserved
system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [io 0x1800-0x18fe] could not be reserved
system 00:06: [mem 0xfd000000-0xfd69ffff] has been reserved
system 00:06: [mem 0xfd6c0000-0xfd6cffff] has been reserved
system 00:06: [mem 0xfd6f0000-0xfdffffff] has been reserved
system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved
system 00:06: [mem 0xfe200000-0xfe7fffff] has been reserved
system 00:06: [mem 0xff000000-0xffffffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [io 0x2000-0x20fe] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 9 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:15.0: BAR 0: assigned [mem 0x7f800000-0x7f800fff 64bit]
pci 0000:00:15.1: BAR 0: assigned [mem 0x7f801000-0x7f801fff 64bit]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:01.0: bridge window [mem 0xa3000000-0xa40fffff]
pci 0000:00:01.0: bridge window [mem 0x90000000-0xa1ffffff 64bit pref]
pci 0000:00:1d.0: PCI bridge to [bus 02]
pci 0000:00:1d.0: bridge window [mem 0xa4300000-0xa43fffff]
pci 0000:00:1d.5: PCI bridge to [bus 03]
pci 0000:00:1d.5: bridge window [io 0x3000-0x3fff]
pci 0000:00:1d.5: bridge window [mem 0xa4200000-0xa42fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: resource 15 [mem 0x7f800000-0xefffffff window]
pci_bus 0000:00: resource 16 [mem 0xfc800000-0xfe7fffff window]
pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:01: resource 1 [mem 0xa3000000-0xa40fffff]
pci_bus 0000:01: resource 2 [mem 0x90000000-0xa1ffffff 64bit pref]
pci_bus 0000:02: resource 1 [mem 0xa4300000-0xa43fffff]
pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:03: resource 1 [mem 0xa4200000-0xa42fffff]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 59792K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x70456000-0x74456000] (64MB) mapped at [ffff9d2770456000-ffff9d2774455fff]
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fd3b81b95f, max_idle_ns: 440795257325 ns
Scanning for low memory corruption every 60 seconds
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1560494989.716:1): state=initialized audit_enabled=0 res=1
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=21 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.26)
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:1d.0: AER enabled with IRQ 123
pcieport 0000:00:1d.5: AER enabled with IRQ 124
pcieport 0000:00:01.0: Signaling PME with IRQ 122
pcieport 0000:00:1d.0: Signaling PME with IRQ 123
pcieport 0000:00:1d.5: Signaling PME with IRQ 124
dpc 0000:00:1d.0:pcie010: DPC error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
dpc 0000:00:1d.5:pcie010: DPC error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
efifb: probing for efifb
efifb: framebuffer at 0x80000000, using 8128k, total 8128k
efifb: mode is 1920x1080x32, linelength=7680, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 240x67
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x11142120
intel_idle: v0.4.1 model 0x9E
intel_idle: lapic_timer_reliable_states 0xffffffff
ACPI: AC Adapter [AC] (off-line)
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PBTN]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
ACPI: Sleep Button [SBTN]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
(NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THM] (25 C)
GHES: HEST is not enabled!
Linux agpgart interface v0.103
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x110 quirks 0x00009810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.13.0-1028-oem xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 16 ports detected
ACPI Error: [\_SB_.UBTC.RUCC] Namespace lookup failure, AE_NOT_FOUND (20170531/psargs-364)
ACPI Error: Method parse/execution failed \_SB.PCI0.XHC.RHUB.HS04._PLD, AE_NOT_FOUND (20170531/psparse-550)
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.13.0-1028-oem xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042: Warning: Keylock active
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
i2c /dev entries driver
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: [email protected]
intel_pstate: Intel P-state driver initializing
intel_pstate: Disabling energy efficiency optimization
intel_pstate: HWP enabled
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
ACPI: Battery Slot [BAT0] (battery present)
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
RAS: Correctable Errors collector initialized.
microcode: sig=0x906ea, pf=0x20, revision=0x96
microcode: Microcode Update Driver: v2.2.
sched_clock: Marking stable (1850029724, 0)->(1868583139, -18553415)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 658b1de55e03d3d81c050a91fa57747ac5b435a7'
Loaded UEFI:db cert 'Dell Inc. UEFI DB: 5ddb772dc880660055ba0bc131886bb630a639e7' linked to secondary sys keyring
Loaded UEFI:db cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' linked to secondary sys keyring
Loaded UEFI:db cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' linked to secondary sys keyring
Loaded UEFI:MokListRT cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63' linked to secondary sys keyring
zswap: loaded using pool lzo/zbud
Key type big_key registered
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass! (rc=-19)
evm: HMAC attrs: 0x1
Magic number: 7:473:822
rtc_cmos 00:01: setting system clock to 2019-06-14 06:49:50 UTC (1560494990)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 2368K
Write protecting the kernel read-only data: 18432k
Freeing unused kernel memory: 2024K
Freeing unused kernel memory: 84K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
x86/mm: Checking user space page tables
x86/mm: Checked W+X mappings: passed, no W+X pages found.
hidraw: raw HID events driver (C) Jiri Kosina
r8168: loading out-of-tree module taints kernel.
r8168: module verification failed: signature and/or required key missing - tainting kernel
ipmi message handler version 39.2
r8168 Gigabit Ethernet driver 8.044.02-NAPI loaded
ipmi device interface
ahci 0000:00:17.0: version 3.0
ahci 0000:00:17.0: SSS flag set, parallel bus scan disabled
ahci 0000:00:17.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
ahci 0000:00:17.0: flags: 64bit ncq sntf stag pm clo only pio slum part ems deso sadm sds apst
scsi host0: ahci
ata1: SATA max UDMA/133 abar m2048@0xa4425000 port 0xa4425100 irq 426
nvme nvme0: pci function 0000:02:00.0
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625.
r8168 Copyright (C) 2017 Realtek NIC software team
This program comes with ABSOLUTELY NO WARRANTY; for details, please see .
This is free software, and you are welcome to redistribute it under certain conditions; see .
r8168 0000:03:00.0 enp3s0: renamed from eth0
usb 1-5: new high-speed USB device number 2 using xhci_hcd
nvidia-nvlink: Nvlink Core is being initialized, major device number 242
nvidia 0000:01:00.0: enabling device (0006 -> 0007)
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 390.25 Wed Jan 24 20:02:43 PST 2018 (using threaded interrupts)
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 390.25 Wed Jan 24 19:29:37 PST 2018
[drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 0
[drm] Memory usable by graphics device = 4096M
checking generic (80000000 7f0000) vs hw (80000000 10000000)
fb: switching to inteldrmfb from EFI VGA
Console: switching to colour dummy device 80x25
[drm] Replacing VGA console driver
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
[drm] Finished loading DMC firmware i915/kbl_dmc_ver1_01.bin (v1.1)
[drm] Initialized i915 1.6.0 20170619 for 0000:00:02.0 on minor 1
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
ACPI: Video Device [PEGP] (multi-head: no rom: yes post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0b/LNXVIDEO:01/input/input8
fbcon: inteldrmfb (fb0) is primary device
Console: switching to colour frame buffer device 240x67
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
usb 1-5: New USB device found, idVendor=1bcf, idProduct=28c1
usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5: Product: Integrated_Webcam_HD
usb 1-5: Manufacturer: CN0WNTY0LOG008AHDEGFA01
nvme nvme0: allocated 38 MiB host memory buffer.
nvme0n1: p1 p2 p3 p4
usb 1-6: new high-speed USB device number 3 using xhci_hcd
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
usb 1-6: New USB device found, idVendor=0bda, idProduct=0129
usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-6: Product: USB2.0-CRW
usb 1-6: Manufacturer: Generic
usb 1-6: SerialNumber: 20100201396000000
ata1.00: ATA-10: ST1000LM035-1RK172, SDM2, max UDMA/133
ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST1000LM035-1RK1 SDM2 PQ: 0 ANSI: 5
usb 1-14: new full-speed USB device number 4 using xhci_hcd
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] Attached SCSI disk
clocksource: Switched to clocksource tsc
usb 1-14: New USB device found, idVendor=8087, idProduct=0aaa
usb 1-14: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usbcore: registered new interface driver rtsx_usb
psmouse serio1: synaptics: queried max coordinates: x [..5664], y [..4648]
psmouse serio1: synaptics: queried min coordinates: x [1278..], y [1206..]
psmouse serio1: synaptics: Your touchpad (PNP: DLL086f PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to [email protected].
psmouse serio1: synaptics: Touchpad model: 1, fw: 8.2, id: 0x1e2a1, caps: 0xf00223/0x840300/0x12e800/0x0, board id: 3240, fw id: 2374689
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
raid6: sse2x1 gen() 5147 MB/s
raid6: sse2x1 xor() 3272 MB/s
raid6: sse2x2 gen() 6398 MB/s
raid6: sse2x2 xor() 4413 MB/s
raid6: sse2x4 gen() 7367 MB/s
raid6: sse2x4 xor() 6564 MB/s
raid6: avx2x1 gen() 16635 MB/s
raid6: avx2x1 xor() 12047 MB/s
raid6: avx2x2 gen() 18881 MB/s
raid6: avx2x2 xor() 13198 MB/s
raid6: avx2x4 gen() 21186 MB/s
raid6: avx2x4 xor() 15430 MB/s
raid6: using algorithm avx2x4 gen() 21186 MB/s
raid6: .... xor() 15430 MB/s, rmw enabled
raid6: using avx2x2 recovery algorithm
xor: automatically using best checksumming function avx
Btrfs loaded, crc32c=crc32c-intel
EXT4-fs (nvme0n1p3): mounted filesystem with ordered data mode. Opts: (null)
[drm] RC6 on
systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Listening on LVM2 poll daemon socket.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Reached target Remote File Systems (Pre).
systemd[1]: Reached target Remote File Systems.
systemd[1]: Reached target Encrypted Volumes.
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
random: crng init done
EXT4-fs (nvme0n1p3): re-mounted. Opts: errors=remount-ro
systemd-journald[404]: Received request to flush runtime journal from PID 1
input: Intel HID events as /devices/platform/INT33D5:00/input/input9
intel-hid INT33D5:00: platform supports 5 button array
input: Intel HID 5 button array as /devices/platform/INT33D5:00/input/input10
acpi PNP0C14:04: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:03)
wmi_bus wmi_bus-PNP0C14:05: WQBC data block query control method not found
acpi PNP0C14:05: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:03)
acpi PNP0C14:06: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:03)
acpi PNP0C14:07: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:03)
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
proc_thermal 0000:00:04.0: enabling device (0000 -> 0002)
intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
Intel(R) Wireless WiFi driver for Linux
Copyright(c) 2003- 2015 Intel Corporation
idma64 idma64.0: Found Intel integrated DMA 64-bit
RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-14 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
RAPL PMU: hw unit of domain psys 2^-14 Joules
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
idma64 idma64.1: Found Intel integrated DMA 64-bit
i2c_hid i2c-DELL086F:00: i2c-DELL086F:00 supply vdd not found, using dummy regulator
iwlwifi 0000:00:14.3: enabling device (0000 -> 0002)
iwlwifi 0000:00:14.3: loaded firmware version 33.610294.0 op_mode iwlmvm
snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
dell_wmi: Dell descriptor buffer has invalid buffer length (32768)
dell_wmi: Detected Dell WMI interface version 1
input: Dell WMI hotkeys as /devices/platform/PNP0C14:05/wmi_bus/wmi_bus-PNP0C14:05/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input11
iwlwifi 0000:00:14.3: Detected Intel(R) Dual Band Wireless AC 9462, REV=0x318
input: DELL086F:00 06CB:7E92 Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-7/i2c-DELL086F:00/0018:06CB:7E92.0001/input/input13
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain uncore
intel_rapl: Found RAPL domain dram
hid-multitouch 0018:06CB:7E92.0001: input,hidraw0: I2C HID v1.00 Mouse [DELL086F:00 06CB:7E92] on i2c-DELL086F:00
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3204: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Headset Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Headphone Mic=0x1a
snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
iwlwifi 0000:00:14.3: base HW address: f4:d1:08:2d:5b:5e
ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19
input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input20
(NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
thermal thermal_zone7: failed to read out thermal zone (-5)
input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input21
input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input22
input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input23
iwlwifi 0000:00:14.3 wlo1: renamed from wlan0
Adding 16488444k swap on /dev/nvme0n1p4. Priority:-1 extents:1 across:16488444k SSFS
audit: type=1400 audit(1560494994.281:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=1034 comm="apparmor_parser"
audit: type=1400 audit(1560494994.283:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/6964/usr/lib/snapd/snap-confine" pid=1027 comm="apparmor_parser"
audit: type=1400 audit(1560494994.283:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/6964/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=1027 comm="apparmor_parser"
audit: type=1400 audit(1560494994.283:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=1032 comm="apparmor_parser"
audit: type=1400 audit(1560494994.284:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=1031 comm="apparmor_parser"
audit: type=1400 audit(1560494994.284:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=1031 comm="apparmor_parser"
audit: type=1400 audit(1560494994.284:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=1036 comm="apparmor_parser"
audit: type=1400 audit(1560494994.285:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=1026 comm="apparmor_parser"
audit: type=1400 audit(1560494994.285:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1026 comm="apparmor_parser"
bbswitch: version 0.8
bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.PEG0.PEGP
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
bbswitch: detected an Optimus _DSM function
bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is on
media: Linux media interface: v0.10
Linux video capture interface: v2.00
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
usbcore: registered new interface driver btusb
Bluetooth: hci0: Bootloader revision 0.1 build 42 week 52 2015
Bluetooth: hci0: Device revision is 2
Bluetooth: hci0: Secure boot is enabled
Bluetooth: hci0: OTP lock is enabled
Bluetooth: hci0: API lock is enabled
Bluetooth: hci0: Debug lock is disabled
Bluetooth: hci0: Minimum firmware build 1 week 10 2014
Bluetooth: hci0: Found device firmware: intel/ibt-17-2.sfi
uvcvideo: Found UVC 1.00 device Integrated_Webcam_HD (1bcf:28c1)
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
uvcvideo 1-5:1.0: Entity type for entity Extension 4 was not initialized!
uvcvideo 1-5:1.0: Entity type for entity Extension 3 was not initialized!
uvcvideo 1-5:1.0: Entity type for entity Processing 2 was not initialized!
uvcvideo 1-5:1.0: Entity type for entity Camera 1 was not initialized!
input: Integrated_Webcam_HD: Integrate as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input24
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
iwlwifi 0000:00:14.3: Conflict between TLV & NVM regarding enabling LAR (TLV = enabled NVM =disabled)
IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
enp3s0: 0xffffab6700cd5000, 3c:2c:30:e4:2e:7e, IRQ 425
IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
Bluetooth: hci0: Waiting for firmware download to complete
Bluetooth: hci0: Firmware loaded in 1278943 usecs
Bluetooth: hci0: Waiting for device to boot
Bluetooth: hci0: Device booted in 12619 usecs
Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-17-2.ddc
Bluetooth: hci0: Applying Intel DDC parameters completed
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
[drm] [nvidia-drm] [GPU ID 0x00000100] Unloading driver
nvidia-modeset: Unloading
nvidia-nvlink: Unregistered the Nvlink Core, major device number 242
bbswitch: disabling discrete graphics
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
pci_raw_set_power_state: 21 callbacks suppressed
pci 0000:01:00.0: Refused to change power state, currently in D0
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
wlo1: authenticate with c4:6e:1f:29:39:86
wlo1: send auth to c4:6e:1f:29:39:86 (try 1/3)
wlo1: send auth to c4:6e:1f:29:39:86 (try 2/3)
wlo1: send auth to c4:6e:1f:29:39:86 (try 3/3)
wlo1: authentication with c4:6e:1f:29:39:86 timed out
ACPI: button: The lid device is not compliant to SW_LID.
IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
Non-volatile memory driver v1.3
PM: Syncing filesystems ... done.
PM: Preparing system for sleep (mem)
bbswitch: enabling discrete graphics
pci 0000:01:00.0: Refused to change power state, currently in D3
pci 0000:01:00.0: Refused to change power state, currently in D3
Freezing user space processes ... (elapsed 0.001 seconds) done.
OOM killer disabled.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Suspending system (mem)
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
psmouse serio1: Failed to disable mouse on isa0060/serio1
tpm tpm0: A TPM error (325) occurred stopping the TPM
PM: suspend of devices complete after 1140.075 msecs
PM: late suspend of devices complete after 31.710 msecs
PM: noirq suspend of devices complete after 219.935 msecs
ACPI: Preparing to enter system sleep state S3
ACPI: EC: event blocked
ACPI: EC: EC stopped
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
IRQ 428: no longer affine to CPU1
IRQ 449: no longer affine to CPU1
smpboot: CPU 1 is now offline
IRQ 440: no longer affine to CPU2
smpboot: CPU 2 is now offline
IRQ 445: no longer affine to CPU3
smpboot: CPU 3 is now offline
IRQ 450: no longer affine to CPU4
smpboot: CPU 4 is now offline
IRQ 447: no longer affine to CPU5
smpboot: CPU 5 is now offline
IRQ 17: no longer affine to CPU6
IRQ 442: no longer affine to CPU6
IRQ 453: no longer affine to CPU6
smpboot: CPU 6 is now offline
IRQ 425: no longer affine to CPU7
smpboot: CPU 7 is now offline
smpboot: CPU 8 is now offline
smpboot: CPU 9 is now offline
smpboot: CPU 10 is now offline
smpboot: CPU 11 is now offline
ACPI: Low-level resume complete
ACPI: EC: EC started
PM: Restoring platform NVS memory
Suspended for 51221.111 seconds
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
cache: parent cpu1 should not be sleeping
intel_pstate: Disabling energy efficiency optimization
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
cache: parent cpu2 should not be sleeping
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
cache: parent cpu3 should not be sleeping
CPU3 is up
smpboot: Booting Node 0 Processor 4 APIC 0x8
cache: parent cpu4 should not be sleeping
CPU4 is up
smpboot: Booting Node 0 Processor 5 APIC 0xa
cache: parent cpu5 should not be sleeping
CPU5 is up
smpboot: Booting Node 0 Processor 6 APIC 0x1
cache: parent cpu6 should not be sleeping
CPU6 is up
smpboot: Booting Node 0 Processor 7 APIC 0x3
cache: parent cpu7 should not be sleeping
CPU7 is up
smpboot: Booting Node 0 Processor 8 APIC 0x5
cache: parent cpu8 should not be sleeping
CPU8 is up
smpboot: Booting Node 0 Processor 9 APIC 0x7
cache: parent cpu9 should not be sleeping
CPU9 is up
smpboot: Booting Node 0 Processor 10 APIC 0x9
cache: parent cpu10 should not be sleeping
CPU10 is up
smpboot: Booting Node 0 Processor 11 APIC 0xb
cache: parent cpu11 should not be sleeping
CPU11 is up
ACPI: Waking up from system sleep state S3
pci 0000:01:00.0: Refused to change power state, currently in D3
PM: noirq resume of devices complete after 100.082 msecs
PM: early resume of devices complete after 15.744 msecs
ACPI: EC: event unblocked
pci 0000:01:00.0: Refused to change power state, currently in D3
sd 0:0:0:0: [sda] Starting disk
xhci_hcd 0000:00:14.0: port 5 resume PLC timeout
usb 1-6: reset high-speed USB device number 3 using xhci_hcd
usb 1-5: reset high-speed USB device number 2 using xhci_hcd
PM: resume of devices complete after 717.508 msecs
acpi LNXPOWER:05: Turning OFF
PM: Finishing wakeup.
OOM killer enabled.
Restarting tasks ... done.
thermal thermal_zone7: failed to read out thermal zone (-5)
[drm] RC6 on
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata1.00: configured for UDMA/133
IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
iwlwifi 0000:00:14.3: Conflict between TLV & NVM regarding enabling LAR (TLV = enabled NVM =disabled)
IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
wlo1: authenticate with c4:6e:1f:29:39:86
wlo1: send auth to c4:6e:1f:29:39:86 (try 1/3)
wlo1: send auth to c4:6e:1f:29:39:86 (try 2/3)
wlo1: send auth to c4:6e:1f:29:39:86 (try 3/3)
wlo1: authentication with c4:6e:1f:29:39:86 timed out
wlo1: authenticate with c4:6e:1f:29:39:86
wlo1: send auth to c4:6e:1f:29:39:86 (try 1/3)
wlo1: send auth to c4:6e:1f:29:39:86 (try 2/3)
wlo1: send auth to c4:6e:1f:29:39:86 (try 3/3)
wlo1: authentication with c4:6e:1f:29:39:86 timed out
wlo1: authenticate with c4:6e:1f:29:39:86
wlo1: send auth to c4:6e:1f:29:39:86 (try 1/3)
wlo1: send auth to c4:6e:1f:29:39:86 (try 2/3)
wlo1: send auth to c4:6e:1f:29:39:86 (try 3/3)
wlo1: authentication with c4:6e:1f:29:39:86 timed out
wlo1: authenticate with c4:6e:1f:29:39:86
wlo1: send auth to c4:6e:1f:29:39:86 (try 1/3)
wlo1: send auth to c4:6e:1f:29:39:86 (try 2/3)
wlo1: send auth to c4:6e:1f:29:39:86 (try 3/3)
wlo1: authentication with c4:6e:1f:29:39:86 timed out
IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
wlo1: authenticate with 60:e3:27:8d:81:18
wlo1: send auth to 60:e3:27:8d:81:18 (try 1/3)
wlo1: authenticated
wlo1: associate with 60:e3:27:8d:81:18 (try 1/3)
wlo1: RX AssocResp from 60:e3:27:8d:81:18 (capab=0x431 status=0 aid=7)
wlo1: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
ACPI Error: [LCD_] Namespace lookup failure, AE_NOT_FOUND (20170531/psargs-364)
ACPI Error: Method parse/execution failed \_SB.PCI0.PEG0.PEGP.BRT6, AE_NOT_FOUND (20170531/psparse-550)
ACPI Error: Method parse/execution failed \EV5, AE_NOT_FOUND (20170531/psparse-550)
ACPI Error: Method parse/execution failed \SMEE, AE_NOT_FOUND (20170531/psparse-550)
ACPI Error: Method parse/execution failed \SMIE, AE_NOT_FOUND (20170531/psparse-550)
ACPI Error: Method parse/execution failed \NEVT, AE_NOT_FOUND (20170531/psparse-550)
ACPI Error: Method parse/execution failed \_SB.PCI0.LPCB.ECDV._Q66, AE_NOT_FOUND (20170531/psparse-550)
ACPI Error: [LCD_] Namespace lookup failure, AE_NOT_FOUND (20170531/psargs-364)
ACPI Error: Method parse/execution failed \_SB.PCI0.PEG0.PEGP.BRT6, AE_NOT_FOUND (20170531/psparse-550)
ACPI Error: Method parse/execution failed \EV5, AE_NOT_FOUND (20170531/psparse-550)
ACPI Error: Method parse/execution failed \SMEE, AE_NOT_FOUND (20170531/psparse-550)
ACPI Error: Method parse/execution failed \SMIE, AE_NOT_FOUND (20170531/psparse-550)
ACPI Error: Method parse/execution failed \NEVT, AE_NOT_FOUND (20170531/psparse-550)
ACPI Error: Method parse/execution failed \_SB.PCI0.LPCB.ECDV._Q66, AE_NOT_FOUND (20170531/psparse-550)
ACPI Error: [LCD_] Namespace lookup failure, AE_NOT_FOUND (20170531/psargs-364)
ACPI Error: Method parse/execution failed \_SB.PCI0.PEG0.PEGP.BRT6, AE_NOT_FOUND (20170531/psparse-550)
ACPI Error: Method parse/execution failed \EV5, AE_NOT_FOUND (20170531/psparse-550)
ACPI Error: Method parse/execution failed \SMEE, AE_NOT_FOUND (20170531/psparse-550)
ACPI Error: Method parse/execution failed \SMIE, AE_NOT_FOUND (20170531/psparse-550)
ACPI Error: Method parse/execution failed \NEVT, AE_NOT_FOUND (20170531/psparse-550)
ACPI Error: Method parse/execution failed \_SB.PCI0.LPCB.ECDV._Q66, AE_NOT_FOUND (20170531/psparse-550)
ACPI Error: [LCD_] Namespace lookup failure, AE_NOT_FOUND (20170531/psargs-364)
ACPI Error: Method parse/execution failed \_SB.PCI0.PEG0.PEGP.BRT6, AE_NOT_FOUND (20170531/psparse-550)
ACPI Error: Method parse/execution failed \EV5, AE_NOT_FOUND (20170531/psparse-550)
ACPI Error: Method parse/execution failed \SMEE, AE_NOT_FOUND (20170531/psparse-550)
ACPI Error: Method parse/execution failed \SMIE, AE_NOT_FOUND (20170531/psparse-550)
ACPI Error: Method parse/execution failed \NEVT, AE_NOT_FOUND (20170531/psparse-550)
ACPI Error: Method parse/execution failed \_SB.PCI0.LPCB.ECDV._Q66, AE_NOT_FOUND (20170531/psparse-550)
ACPI Error: [LCD_] Namespace lookup failure, AE_NOT_FOUND (20170531/psargs-364)
ACPI Error: Method parse/execution failed \_SB.PCI0.PEG0.PEGP.BRT6, AE_NOT_FOUND (20170531/psparse-550)
ACPI Error: Method parse/execution failed \EV5, AE_NOT_FOUND (20170531/psparse-550)
ACPI Error: Method parse/execution failed \SMEE, AE_NOT_FOUND (20170531/psparse-550)
ACPI Error: Method parse/execution failed \SMIE, AE_NOT_FOUND (20170531/psparse-550)
ACPI Error: Method parse/execution failed \NEVT, AE_NOT_FOUND (20170531/psparse-550)
ACPI Error: Method parse/execution failed \_SB.PCI0.LPCB.ECDV._Q66, AE_NOT_FOUND (20170531/psparse-550)
ACPI Error: [LCD_] Namespace lookup failure, AE_NOT_FOUND (20170531/psargs-364)
ACPI Error: Method parse/execution failed \_SB.PCI0.PEG0.PEGP.BRT6, AE_NOT_FOUND (20170531/psparse-550)
ACPI Error: Method parse/execution failed \EV5, AE_NOT_FOUND (20170531/psparse-550)
ACPI Error: Method parse/execution failed \SMEE, AE_NOT_FOUND (20170531/psparse-550)
ACPI Error: Method parse/execution failed \SMIE, AE_NOT_FOUND (20170531/psparse-550)
ACPI Error: Method parse/execution failed \NEVT, AE_NOT_FOUND (20170531/psparse-550)
ACPI Error: Method parse/execution failed \_SB.PCI0.LPCB.ECDV._Q66, AE_NOT_FOUND (20170531/psparse-550)
ACPI Error: [LCD_] Namespace lookup failure, AE_NOT_FOUND (20170531/psargs-364)
ACPI Error: Method parse/execution failed \_SB.PCI0.PEG0.PEGP.BRT6, AE_NOT_FOUND (20170531/psparse-550)
ACPI Error: Method parse/execution failed \EV5, AE_NOT_FOUND (20170531/psparse-550)
ACPI Error: Method parse/execution failed \SMEE, AE_NOT_FOUND (20170531/psparse-550)
ACPI Error: Method parse/execution failed \SMIE, AE_NOT_FOUND (20170531/psparse-550)
ACPI Error: Method parse/execution failed \NEVT, AE_NOT_FOUND (20170531/psparse-550)
ACPI Error: Method parse/execution failed \_SB.PCI0.LPCB.ECDV._Q66, AE_NOT_FOUND (20170531/psparse-550)
TCP: wlo1: Driver has suspect GRO implementation, TCP performance may be compromised.
CPU0: Core temperature above threshold, cpu clock throttled (total events = 1)
CPU6: Core temperature above threshold, cpu clock throttled (total events = 1)
CPU9: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU1: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU2: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU7: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU8: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU3: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU4: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU5: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU11: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU10: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU6: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU0: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU0: Core temperature/speed normal
CPU6: Core temperature/speed normal
CPU8: Package temperature/speed normal
CPU2: Package temperature/speed normal
CPU1: Package temperature/speed normal
CPU9: Package temperature/speed normal
CPU11: Package temperature/speed normal
CPU4: Package temperature/speed normal
CPU7: Package temperature/speed normal
CPU3: Package temperature/speed normal
CPU5: Package temperature/speed normal
CPU10: Package temperature/speed normal
CPU6: Package temperature/speed normal
CPU0: Package temperature/speed normal
wlo1: deauthenticating from 60:e3:27:8d:81:18 by local choice (Reason: 3=DEAUTH_LEAVING)
wlo1: failed to remove key (1, ff:ff:ff:ff:ff:ff) from hardware (-22)
PM: Syncing filesystems ... done.
PM: Preparing system for sleep (mem)
bbswitch: enabling discrete graphics
pci 0000:01:00.0: Refused to change power state, currently in D3
Freezing user space processes ... (elapsed 0.002 seconds) done.
OOM killer disabled.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Suspending system (mem)
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
PM: suspend of devices complete after 917.066 msecs
PM: late suspend of devices complete after 30.875 msecs
PM: noirq suspend of devices complete after 219.930 msecs
ACPI: Preparing to enter system sleep state S3
ACPI: EC: event blocked
ACPI: EC: EC stopped
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
irq_migrate_all_off_this_cpu: 19 callbacks suppressed
IRQ 452: no longer affine to CPU3
smpboot: CPU 3 is now offline
smpboot: CPU 4 is now offline
smpboot: CPU 5 is now offline
IRQ 426: no longer affine to CPU6
IRQ 441: no longer affine to CPU6
IRQ 443: no longer affine to CPU6
IRQ 444: no longer affine to CPU6
IRQ 445: no longer affine to CPU6
IRQ 448: no longer affine to CPU6
IRQ 449: no longer affine to CPU6
IRQ 450: no longer affine to CPU6
IRQ 451: no longer affine to CPU6
smpboot: CPU 6 is now offline
smpboot: CPU 7 is now offline
smpboot: CPU 8 is now offline
smpboot: CPU 9 is now offline
smpboot: CPU 10 is now offline
smpboot: CPU 11 is now offline
ACPI: Low-level resume complete
ACPI: EC: EC started
PM: Restoring platform NVS memory
Suspended for 13.993 seconds
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
cache: parent cpu1 should not be sleeping
intel_pstate: Disabling energy efficiency optimization
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
cache: parent cpu2 should not be sleeping
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
cache: parent cpu3 should not be sleeping
CPU3 is up
smpboot: Booting Node 0 Processor 4 APIC 0x8
cache: parent cpu4 should not be sleeping
CPU4 is up
smpboot: Booting Node 0 Processor 5 APIC 0xa
cache: parent cpu5 should not be sleeping
CPU5 is up
smpboot: Booting Node 0 Processor 6 APIC 0x1
cache: parent cpu6 should not be sleeping
CPU6 is up
smpboot: Booting Node 0 Processor 7 APIC 0x3
cache: parent cpu7 should not be sleeping
CPU7 is up
smpboot: Booting Node 0 Processor 8 APIC 0x5
cache: parent cpu8 should not be sleeping
CPU8 is up
smpboot: Booting Node 0 Processor 9 APIC 0x7
cache: parent cpu9 should not be sleeping
CPU9 is up
smpboot: Booting Node 0 Processor 10 APIC 0x9
cache: parent cpu10 should not be sleeping
CPU10 is up
smpboot: Booting Node 0 Processor 11 APIC 0xb
cache: parent cpu11 should not be sleeping
CPU11 is up
ACPI: Waking up from system sleep state S3
pci 0000:01:00.0: Refused to change power state, currently in D3
PM: noirq resume of devices complete after 100.084 msecs
PM: early resume of devices complete after 16.005 msecs
ACPI: EC: event unblocked
pci 0000:01:00.0: Refused to change power state, currently in D3
sd 0:0:0:0: [sda] Starting disk
xhci_hcd 0000:00:14.0: port 5 resume PLC timeout
usb 1-5: reset high-speed USB device number 2 using xhci_hcd
usb 1-6: reset high-speed USB device number 3 using xhci_hcd
PM: resume of devices complete after 719.367 msecs
acpi LNXPOWER:05: Turning OFF
PM: Finishing wakeup.
OOM killer enabled.
Restarting tasks ... done.
[drm] RC6 on
thermal thermal_zone7: failed to read out thermal zone (-5)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata1.00: configured for UDMA/133
IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
iwlwifi 0000:00:14.3: Conflict between TLV & NVM regarding enabling LAR (TLV = enabled NVM =disabled)
IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
enp3s0: 0xffffab6700cd5000, 3c:2c:30:e4:2e:7e, IRQ 425
IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
wlo1: authenticate with 60:e3:27:8d:81:18
wlo1: send auth to 60:e3:27:8d:81:18 (try 1/3)
wlo1: authenticated
wlo1: associate with 60:e3:27:8d:81:18 (try 1/3)
wlo1: RX AssocResp from 60:e3:27:8d:81:18 (capab=0x431 status=0 aid=3)
wlo1: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready